1. Look out for the hanging slot at the back of the wooden base – it is about 2.5cm below the top edge (Center). Both openings (holes) at the side are about 1cm in diameter.

Back view of the wooden base (before padding)

2. Place a nail (At least 4-5cm into the wall), or drill a hole on the wall to insert a nut / wall plug (4-5cm depth as minimum). The nail / nut cap should be about 0.8cm in diameter to fit well into the openings at the side.

3. Hang the painting / clock by inserting the nail / nut cap into the slot. If the nut cap is larger than the slot – insert it from the side of the slot where the opening (or hole) is largest in size (1cm in diameter).

4. Adjust (left or right) for the painting to reach a horizontal level.